Item # PE-08-BI-0500F-N, 1/4 Inch (in) Outside Diameter Linear Low-Density Polyethylene (LLDPE) Tubing On Seelye Acquisitions, Inc.

ServicesCustom Tank Fabrication Furniture Refinishing Plastic and Metal MachiningProductsTefen Fittings and Products Plastic Welders Thermoplastic Welding Rods Plastic Welding Tips Welder Elements Welder Replacement Parts Master Appliance Heat Guns Optional Equipment

Registered Users – Sign In

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items


All Categories > John Guest® Fittings > LLDPE Tubing > Linear Low-Density Polyethylene (LLDPE) Tubing > Item # PE-08-BI-0500F-N


	Item # PE-08-BI-0500F-N, 1/4 Inch (in) Outside Diameter Linear Low-Density Polyethylene (LLDPE) Tubing
	List Price $104.07

Inch Black Polypropylene Linear Low-Density Polyethylene (LLDPE) Coils

larger image

The John Guest® PE Range of plastic tubing is produced in Linear Low-Density Polyethylene for cold and intermittent hot water applications.

Our tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non-contaminating materials. Common applications are in water purification, water conditioners, ice makers and misting systems. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water. Our tubing is made from FDA compliant materials and is NSF International certified. John Guest® LLDPE Tubing provides excellent resistance to environmental stress cracking as measured by ASTM D-1693 (10% IGEPAL).

Specifications · Additional Information · Pneumatics Applications · Tube Inserts · Exposure to Ultraviolet Light · Chemical Resistance · Potable Water Applications · Note

Specifications

Brands

John Guest®

Tube Outside Diameter

1/4 in

Inside Diameter

0.170 in

Tube Tolerance

+0.001 in
-0.004 in

Coil Length

500 ft

Minimum Bend Radius

1.00 in

Color

Natural

Optional Colors¹

Green
Orange
Violet
Yellow

Material

Linear Low-Density Polyethylene (LLDPE)

NSF International Standard

NSF 51
NSF 61

Working Temperature²

70 to 150 ºF

Working Pressure at 70 Degree Fahrenheit (ºF) Temperature

230 psi

Working Pressure at 150 Degree Fahrenheit (ºF) Temperature³

120 psi

Applications

Ice Makers and Misting
Water Conditioners
Water Purification

Approvals

Food And Drug Administration

Test Method

ASTM D-1693 (10% IGEPAL)

¹ Black tubing is UV stabilized.
² The maximum temperatures and pressures do not take chlorine content into account. This could reduce service life.
³ Burst pressures are approximately 3 times the maximum working pressure.

Please note maximum pressure rating for a 'system' depends on the lowest rated component.

Additional Information

John Guest® Polyethylene tubing is designed for use with John Guest® Super Speedfit push-fit fittings, John Guest® Shut-Off Valves and virtually all standard tubing connectors.

Pneumatics Applications

John Guest® LLDPE tube is suitable for pneumatic applications providing pressure is maximum 150psi @ 70ºF (10 bar @ 20ºC). At elevated temperatures 120ºF+ (50ºC+) mineral oil will degrade LLPDE tube and therefore, LLDPE tube used in pneumatic circuits should be periodically checked and replaced if necessary.

Tube Inserts

If the tube is used in a warm water system a tube insert is necessary.

Exposure to Ultraviolet Light

John Guest® Black LLDPE tubing is UV stabilized and can be exposed to direct ultraviolet light (e.g. direct sunlight); other colors of John Guest® LLDPE tubing are not UV stabilized and cannot be exposed to direct ultraviolet light.

Chemical Resistance

For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department.

NOTE: When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with tubing and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air / pneumatic systems.

Potable Water Applications

John Guest® LLDPE tubing is suitable for potable cold water applications with a maximum chlorine content of 4 parts per million (4 ppm). Heating water above 70ºF (20ºC) and or pressures above the maximum will significantly reduce service life. Direct exposure to sunlight will also significantly reduce its useful service. As part of good practice tubing should be inspected regularly. If there is any evidence of damage, hardening or cracking it should be replaced immediately.

Note

Note		Prices subject to change without notice. Popular items are now generally in stock and are available in minimum quantities of 2 coils. Other items may be subject to longer lead times and are available in minimum quantities of 50 coils.